|
Lifting table - Model SL2 |
|
|
|
| |
 |
|
|
| Conceived for loads of 500, 1000, 1500 or 2000 daN, this range has been especially studied for installation of working stations. |
|
| Building
|
|
| |
Plain or a chequered steel plate on all the models.
Scissors device in heavy section flat steel plate profile cut.
Single acting cylinder with chrome steel rod and an end of stroke mechanical stop.
Articulations, bearings and rollers without maintenance, forecasted to execute a maximum of 20 cycles per hour, 8 hours a day, 5 days a week.
Hydro electrical power unit placed inside or outside the lifting table.
Electric control chest placed outside, feeding voltage 3phased 230 or 400 Volts 50 Hz, connected to the lifting table with 3 meters cable.
An "up-down" and "emergency stop" 24 Volts hand push-button control box connected to the electric control chest with 3 meters cable.
Adjustable safety travel limit switches .... mechanical type plastic box IP 65.
Electrical cables model FR-N05-VV5-F.
Colour : BLUE RAL 5014. |
|
|
|
| Security
|
|
| |
Double hydraulic safety valve incorporated in the cylinder and a pilot-operated electrically lock valve at this cylinder base for maintenance and locking up of the platform in position in the event of electric voltage failure or hose breaking.
Mechanical end of stroke stop in each cylinder.
Pressure limit valve set in the factory, to prohibit a load higher than 1,1 time the lifting table rated capacity.
Electrical end of stroke switch on high position ; it ensures the automatic stop of the lifting platform at its maximum stroke.
Safety frame under the platform perimeter to stop the lowering in case of obstacles.
Hand push button control up-down and emergency stop : 24 Volts.
Safety legs keep the lifting table at a settled level for maintenance.
Before forwarding, each lifting table is checked and undergoes the regulation tests .
Conceiving and building of these lifting tables comply with the rules of manufacture and safety requirements imposed by the European Standards and regulations no. 98/37.
The EC of Conformity is set on all these delivered models. |
|
|
|
| Main options |
|
| |
Fix, removable or portable standardize safety handrails.
Bridging plate with manual or hydraulic raising to facilitate the transfer of the loads in vehicles.
Retractable plinth and stop (drop proof security for the lifting trucks).
For side protection of the scissors and to forbid access under the lifting plate: safety removable safety skirts with bellows or steel net, curtains fabric or metal on spring winder.
Manually or motorized swivelling, tilting, telescopic or sliding platform.
Special articulations for uninterrupted working at high rates.
Up – Down controls by pedal.
Unlike feeding and control voltage.
Mobile version on ground or rails with free or motorized displacement.
Special treatment for aggressive surroundings (sanding and suitable painting, , plating, hot dip galvanization).
Free or motorized rollers.
Constant levelling device by photo-electric cell for loading and unloading of materials in plates (paperboard, wood, plaster, etc..).
Specific electric components : explosion-proof, tropicalized, programmable automaton, etc...
Special models of lifting tables and equipment, on request. |
|
|
|
|
| |
|
Ref. |
Load
(daN) |
Length
(mm) |
Width
(mm) |
L.P.
(mm) |
H.P.
(mm) |
Stroke
(mm) |
Time
(sec.) |
Power
(kw) |
Weight
(kg) |
|
SL205-1010 |
500 |
1000 |
1000 |
400 |
1450 |
1050 |
15 |
1.10 |
530 |
|
SL205-1210 |
500 |
1200 |
1000 |
400 |
1800 |
1400 |
20 |
1.10 |
600 |
|
SL205-1512 |
500 |
1500 |
1200 |
400 |
2150 |
1750 |
35 |
1.50 |
650 |
|
SL205-2010 |
500 |
2000 |
1000 |
400 |
2900 |
2500 |
35 |
3.00 |
700 |
|
SL210-1010 |
1000 |
1000 |
1000 |
400 |
1450 |
1050 |
25 |
1.10 |
550 |
|
SL210-1210 |
1000 |
1200 |
1000 |
400 |
1800 |
1400 |
35 |
1.10 |
630 |
|
SL210-1512 |
1000 |
1500 |
1200 |
400 |
2150 |
1750 |
45 |
1.50 |
670 |
|
SL215-1010 |
1500 |
1000 |
1000 |
400 |
1450 |
1050 |
30 |
1.50 |
570 |
|
SL215-1210 |
1500 |
1200 |
1000 |
400 |
1700 |
1300 |
35 |
1.50 |
600 |
|
SL215-1512 |
1500 |
1500 |
1200 |
400 |
2150 |
1750 |
35 |
3.00 |
700 |
|
SL220-1010 |
2000 |
1000 |
1000 |
400 |
1450 |
1050 |
30 |
1.50 |
590 |
|
SL220-1210 |
2000 |
1200 |
1000 |
400 |
1700 |
1300 |
35 |
1.50 |
630 |
|
SL220-1512 |
2000 |
1500 |
1200 |
400 |
2150 |
1750 |
35 |
3.00 |
700 |
|
|
|
|
|
| |
| SL2 in mobile version on ground, manually removable with a pushing pole and a manual hydraulic pump with lever |
|
|
| |
| Articulations on cylinder rod end |
|
|
| |
| Hot dip galvanized SL2 on high position |
|
|
| |
| Detail of a safety leg for maintenance articulated on the mobile points of the scissors and the base frame, with sight on the fixing slings corner-plates and the end of stroke switch |
|
|
| |
| SL2 in high position with support of hydraulic unit, control chest and push-button box |
|
|
| |
| SL2 in low position with screwed sling, ready for forwarding |
|
|
| |
| SL2 with side protection skirt |
|
|
| |
| Detail of articulations and pilot-operated flap valve and rigid piping at the cylinder base |
|
|
|
