|
| |
 |
|
|
| The elevators with columns allow the production of EUP (Elevator of Particular Use) for important strokes with reduced platform dimensions, without accompanying staff. For this application they are a supplement to the tables with twofold and threefold lifting scissors. |
|
| Building
|
|
| |
Platform with plain or chequered steel plate, overhung before 2 guiding columns to fix on the ground and against a self-supporting wall.
Platform lifting du plateau under the action of a chain reeved at the head of a vertical hydraulic cylinder installed between the 2 columns.
Single acting cylinder with a chrome steel rod.
Hydro electrical power unit and electrical control chest connected to the elevator with 3 meters long cable and hose.
Feeding voltage 3phased 230 or 400 Volts 50 Hz.
2 hand push-button boxes : ＾up-down￣ and ＾emergency stop￣ 24 Volts, one at each level.
Electro mechanical lock fixed on the guiding columns for mechanical locking of the platform at the maximum stroke (conveying level).
Relay in the electrical control chest for two electromagnetic locks supplied separately in kit to fit on the access doors.
Travel limit switches on all units .... mechanical type plastic box IP 65.
Electrical cables model FR-N05-VV5-F.
Elevator forecasted to execute a maximum of 5 complete cycles per hour, continuously 8 hours a day, 5 days a week.
Colour : BLUE RAL 5014. |
|
|
|
| Security
|
|
| |
Double hydraulic safety valve incorporated in the cylinder and a pilot-operated electrically lock valve in foot of this cylinder for maintenance and locking up of the platform in position in the event of electric voltage failure or hose breaking.
Pressure limit valve set in the factory, to prohibit a load higher than 1,1 time the lifting table rated capacity.
Electrical end of stroke switch on high position ; it ensures the automatic stop of the lifting platform at its maximum stroke.
Hand push button control up-down and emergency stop : 24 Volts.
Before forwarding, each lifting table is checked and undergoes the regulation tests.
Conceiving and building of these lifting tables comply with the rules of manufacture and safety requirements imposed by the European Standards and regulations no. 98/37.
The EC of Conformity is set on all these delivered models. |
|
|
|
| Main options |
|
| |
Platforms, strokes and a number of served levels can be various/adapted to the environment.
Shaft / latticed or metal sheath with landing doors.
Unlike feeding and control voltage.
Special treatment for aggressive surroundings (sanding and suitable painting, , plating, hot dip galvanization).
Manually or motorized swivelling platform.
Special models of lifting tables on request. |
|
|
|
|
| |
|
Ref. |
Load
(daN) |
Length
(mm) |
Width
(mm) |
L.P.
(mm) |
H.P.
(mm) |
Stroke
(mm) |
Time
(sec.) |
Power
(kw) |
Weight
(kg) |
|
EC03 |
300 |
800 |
800 |
100 |
3600 |
3500 |
60 |
1.10 |
600 |
|
EC07 |
750 |
900 |
900 |
150 |
3650 |
3500 |
40 |
1.10 |
800 |
|
EC12 |
1250 |
1200 |
1200 |
180 |
3680 |
3500 |
40 |
3.50 |
900 |
|
EC25 |
2500 |
1200 |
1200 |
210 |
3710 |
3500 |
45 |
4.00 |
1700 |
|
|
|
|
|
| |
| Cylinder rod end with detail of the coil tie-iron reeved on pinion, fasteners with electric checking of tension, cylinder fixings |
|
|
| |
| Rear view of the elevator with columns and detail of the adjustable in height lock and the distribution box |
|
|
| |
| Rear view of the elevator placed against the testing cross-beam in the factory |
|
|
| |
| Rear view with detail of the cilynder base with piping on the pilot-operated flap valve |
|
|
|
